|
Post by theman on Apr 16, 2006 22:20:20 GMT -5
Hello I've been using PSX for a little while and I have a question about some games which I've been unable to run. I have made some ISO's from my Grandia and Chrono Trigger games since the CD's are damaged and I've tried to run them on the emulator, but I've been unable to use them as they are not .cue files. How do I convert them into usable games? Thanks
|
|
|
Post by Melanogaster on Apr 16, 2006 22:25:54 GMT -5
You can emulate them using Daemon Tools, for example. This way you wouldn't need to convert them into .bin/.cue images.
|
|
lewpy
New Member
I am not an Atomic Playboy, m'kay?
Posts: 32
|
Post by lewpy on Apr 17, 2006 5:22:19 GMT -5
For most PSX games (without CD Audio tracks), you can just create a .CUE file with the following lines FILE PSX.BIN BINARY TRACK 01 MODE2/2352 INDEX 01 00:00:00
Just replace "PSX.BIN" with the actual name of the .BIN file you have. But if you really want to "hack" it, just create a new .CUE file (zero-length file) with the same name as the .BIN file. So for PSX.BIN, create PSX.CUE, etc. You do not have to put anything in the .CUE file
|
|
|
Post by slippy on Apr 17, 2006 6:42:53 GMT -5
UltraISO will convert many formats to bin/cue as well. Or you could rerip the games with cdrwin or any other program that creates bin/cue files to start with.
|
|
|
Post by blackmath on Apr 17, 2006 16:22:12 GMT -5
MagicISO. That is what I use. A lot of my games are nrg and ccd format. I mount with alcohol or daemon and re-rip with MagicIso to bin/cue format. The only reason I do this is to be able to play these on my cabinet with my frontend, and psx is the most compatible with my games so far.
black
|
|
|
Post by emulover on Apr 18, 2006 8:14:57 GMT -5
Dont just go converting everything
some games use subchannel data for protection schemes
the best copys would be ripped using cloneCD with subchannel reading enabled, in a LiteOn SOHD-167T dvd drive (this is one of the best cd and dvd readers(it can read terribly scratched discs with ease)
Then just mount that image with Daemon Tools as suggested
|
|